Age Of Mecha™ Mech Frame (action vehicle kit print file)
NOT A PHYSICAL PRODUCT! DOWNLOADABLE DIGITAL 3D PRINT FILE ONLY!
!!!!PLEASE READ THE DESCRIPTION BELOW CAREFULLY !!!!
Ages 15+! Not suitable for children! Small parts can be swallowed!
Age Of Mecha™ Mech Frame 3D printable action vehicle file parts including accessories
Required once for all 1/35 printable Mech designs!
- 57 unique parts - accessories include 5 types of handheld guns, 5 types of handheld rifles, 3 types of shoulder mounted heavy weapons, 5 types of hip mounted utilities - detailed build instructions included. - M2 size metal nuts and screws required (length: 6mm; 1/4 inch), not included!! - fully articulated with 35 points of articulation.
The Mech Frame is compatible with and required for all 1/35 scale Mech Designs and includes all Weapons (handheld rifles and guns and shoulder mounted heavy weapons), hip utilities and two different toe designs. The individual Mech types are available separately. Pilot action figure files are not included and sold separately.
includes STLs and pre-supported files for Chitubox.
The download files will be provided in *.rar compression file archives. To unpack the file contents, either use WinRar (winrar.de) for windows, or The Unarchiver App (Apple App Store) for Mac OS. Both applications are free of charge.
1/35 scale printable parts. Figure height (combined with Mech designs): approx. 7.9 inch / 20 cm
The parts come in pre-supported Chitubox files (SLA and DLP) and non pre-supported STL file format (for all other printers, FDM).
We highly recommend to choose SLA or DLP printers!
FDM prints usually do not show the very fine detail, unless you scale up the parts
For SLA/DLP printers, we highly recommend to use the Resione M58 or Resione TH72 resins. Resione M58ResioneTH72
For near perfect prints, use the following settings:
Wash the parts in IPA (70%-99%) for 20 minutes. UV post cure the parts for 20 minutes.
Assemble the parts after curing, to avoid dusting/powdering of the resin surface!
To receive full transparency and a clear and glossy glass effect, apply at least one layer of glossy clear coat with airbrush.
The joint fits are quite tight in the beginning, so make sure to wiggle the parts together slowly and carefully to avoid breaking parts. Should you still struggle to assemble the snap fit joints, place the parts in hot water for 30 seconds to soften them a bit, then assemble. Some printed resin tends to shrink over time (the process can go on several weeks after print) until it has fully settled it's properties. If the joints come loose, use small portions of modelling clay, like super sculpey to fill in the gaps.
Buy buying these files, you automatically agree to not resell and/or distribute them in any way. Resale/commercial distribution of the files is not allowed and will be prosecuted! After purchase, your download files will be imprinted with an individual fingerprint and can be backtraced in case of infringement!