your 3D printable toys supplier



Age Of Mecha™ Astro Mech (action vehicle kit print file)

販売価格 €16,00 通常価格 €18,00

税込

NOT A PHYSICAL PRODUCT!
DOWNLOADABLE DIGITAL 3D PRINT FILE ONLY!


!!!! PLEASE READ THE DESCRIPTION BELOW CAREFULLY !!!!

Ages 15+! Not suitable for children! Small parts can be swallowed!


Age Of Mecha™ Astro Mech
3D printable action vehicle file parts

AOMM000 Mech Frame Required!

- 26 unique parts
- detailed build instructions included
- pilot action figures not included and available separately

includes STLs and pre-supported files for Chitubox.


CHITUBOX V1.9.4 FILES INCLUDED!
download Chitubox V1.9.4 here:
https://www.chitubox.com/en/index

Images show color proposals.

The download files will be provided in *.rar compression file archives.
To unpack the file contents, either use WinRar (winrar.de) for windows, or The Unarchiver App (Apple App Store) for Mac OS. Both applications are free of charge.

1/35 scale printable parts.
Figure height (combined with Mech Frame): approx. 7.9 inch / 20 cm


The parts come in pre-supported Chitubox files (SLA and DLP) and non pre-supported STL file format (for all other printers, FDM).

We highly recommend to choose SLA or DLP printers!

FDM prints usually do not show the very fine detail, unless you scale up the parts

For SLA/DLP printers, we highly recommend to use the Resione M58 or Resione TH72 or Resione Anti-Impact resins.
Resione M58  ResioneTH72 Resione Anti-Impact

For near perfect prints, use the following settings:

Bottom Layers: 5
Bottom Layer Exposure Time: 50 seconds
Standard Layer Exposure Time: 2.5 seconds

Leave all other settings as recommended by the manufacturer:
https://www.resione.com/pages/settings

For transparent glass parts, use Resione G217 transparent clear resin:
Resione G217
For near perfect prints, use the following settings:

Bottom Layers: 5
Bottom Layer Exposure Time: 36 seconds
Standard Layer Exposure Time: 4 seconds

For rubber tire parts, use Resione F69 flexible resin:
Resione F69
Use manufacturer's recommended print settings.

Wash the parts in IPA (70%-99%) for 20 minutes.
UV post cure the parts for 20 minutes (M58, G217 and F69)
                                            60 minutes (TH72 and Anti-Impact)

Assemble the parts after curing, to avoid dusting/powdering of the resin surface!



To receive full transparency and a clear and glossy glass effect, apply at least one layer of  glossy clear coat with airbrush.

The joint fits are quite tight in the beginning, so make sure to wiggle the parts together slowly and carefully to avoid breaking parts.
Should you still struggle to assemble the snap fit joints, place the parts in hot water for 30 seconds to soften them a bit, then assemble.
Some printed resin tends to shrink over time (the process can go on several weeks after print) until it has fully settled it's properties.
If the joints come loose, use small portions of modelling clay, like super sculpey to fill in the gaps.

Buy buying these files, you automatically agree to not share them and/or using them commercially in any way. This includes reselling/redistributing/sharing the files and/or the 3D printed or in any other way manufactured models based on these files.



x