The download files will be provided in *.rar compression file format. If you get a "corrupt file" error when trying to unpack the files, rename the file ending to *.zip and try again. If it should still fail to unpack, contact us.
1/35 scale printable parts, snap fit assembly, no glue required. Figure height: approx. 2 inch / 5 cm
The parts come in FORM ( for Form2 and Form3 printers) and STL file format (for all other printers, SLA, DLP and FDM).
If you do not own or have immediate access to a printer, here's a list of online 3D printing services you can use:
After the Isopropanol wash, leave the parts out to dry for at least 6-12 hours (normal room temperature, no direct sunlight!), that way the surface is hard enough as to not rub off during assembly, yet the parts still have enough flexibility. The joint fits are quite tight in the beginning, so make sure to wiggle the parts together slowly and carefully to avoid breaking parts. Optionally, you can airbrush or paint the parts before assembly for easier masking. Some printed resin tends to shrink over time (the process can go on several weeks after print) until it has fully settled it's properties. If the joints come loose, use small portions of modelling clay, like super sculpey to fill in the gaps.